Clog Clearing Solutions

  • STANDING WATER
  • SLOW DRAIN
  • WORKS IN 7 MINUTES
  • DESIGNED FOR HAIR CLOGS

General Information

Live life in the fast lane, and unclog stubborn drains with Liquid-Plumr® Urgent Clear®. This cutting-edge gel formula is lab-tested to blast away even the toughest clogs in 7 minutes,* so you’ll never have to worry about a clogged sink or shower drain again. Works best on hair, gunk, grease and soap scum.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Fast clog-clearing action
  • Standing water clogs
  • Slow-running drains

"I want to thank you for such a great product!" - Mrs. Katie D.


Usage Directions

  1. POUR. Slowly pour the entire bottle down the drain.
  2. WAIT. For fully clogged drains, allow the product to work for at least 7 minutes or until the drain is clear. To unclog slow drains, allow the product to work for at least 15 minutes.
  3. RINSE. Flush with hot water.

For garbage disposals, follow same usage directions and flush with disposal running. Avoid all splashing. Not intended for use in the toilet.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

FAQs

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

What should be done if my problem gets worse after using this product?

This may happen when a partially dissolved clog gets lodged further down the pipe. We recommend trying another bottle of this product. However, if the problem continues to persist, you should call a plumber as there are some plumbing situations that even Liquid-Plumr® can not fix.

How long should I wait before flushing the drain with water?

If you have a standing water clog, wait at least 7 minutes before flushing with water. If you have a slow flow drain, wait 15 minutes before flushing with water. If you have an especially difficult clog, you can safely let the product sit overnight.

How much of this product should I use per occasion?

For best results, we recommend using the entire bottle for every clog problem.

Will this product improve a slow drain?

Yes. This product is designed to work fast on slow running drains.

Can I use this product in a drain that contains standing water?

Yes. This product is designed to pour through standing water. It is formulated to clear the full clogs that cause water to stop draining.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

Can I use this Liquid-Plumr® product in my garbage disposal?

Yes. This product is safe to use in your garbage disposal. When using this product in a drain that contains a garbage disposal, simply follow normal directions for use and flush the product with the disposal running.

What ingredients are in this product?

Ingredients include sodium hypochlorite, sodium hydroxide, biodegradable surfactant, and sodium silicate (corrosion inhibitor). Contains no phosphorus.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

General Information

Put the power of a professional plumber in your hands with Liquid-Plumr® Double Impact® Snake + Gel System, and attack that clogged sink or shower drain with a potent one-two combo. The 23″ snake dislodges hair and gunk to unclog pipes, and a thick gel flushes away the residual gunk that slows drains down.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Toughest clogs
  • Standing water clogs
  • Slow-running drains

"I think your product is outstanding!" - Mrs. Karen G.


Usage Directions

  1. INSERT THE SNAKE. Insert the 23-inch snake into the drain and move it up and down to grab the clog. Pull the snake out of the drain slowly and throw it away.
  2. POUR. Slowly pour the entire bottle down the drain.
  3. WAIT. Allow the product to work for at least 15 minutes.
  4. RINSE. Flush with hot water.

Not intended for use in the toilet or garbage disposal.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.Snake must be used before pouring gel down the drain. Snake shouldn’t be used when gel is present in pipes.

FAQs

What should I do with the snake after using it?

Dispose of the snake after a single use.

How do I use the snake?

Use the snake before pouring any of the gel down the drain. Insert the snake into the drain and move it up and down to dislodge the clog. Pull the snake out of the drain and throw it away.

What should be done if my problem gets worse after using this product?

This may happen when a partially dissolved clog gets lodged further down the pipe. We recommend trying another bottle of this product. However, if the problem continues to persist, you should call a plumber as there are some plumbing situations that even Liquid-Plumr can not fix.

How long should I wait before flushing the drain with water?

Always use the snake before pouring any gel down your drain. Then wait at least 15 minutes after pouring the gel down the drain before flushing with water. If you have an especially difficult clog, you can safely let the product sit overnight.

How much of this product should I use per occasion?

For best results, we recommend using the snake and then the entire bottle of gel for every clog problem.

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

Will this product improve a slow drain?

Yes. This product is designed to work fast on slow running drains.

Can I use this product in a drain that contains standing water?

Yes. This product is designed to pour through standing water. It is formulated to clear the full clogs that cause water to stop draining.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

Can I use this Liquid-Plumr® product in my garbage disposal?

Yes. This product is safe to use in your garbage disposal. When using this product in a drain that contains a garbage disposal, simply follow normal directions for use and flush the product with the disposal running.

What ingredients are in this product?

Ingredients include sodium hypochlorite, sodium hydroxide, biodegradable surfactant, and sodium silicate (corrosion inhibitor). Contains no phosphorus.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

General Information

Our thickest gel ever is formulated to coat pipe walls, unclog your drain and destroy that Sasquatch-like hair clump that’s slowin’ the flow in your shower. Just pour, wait 15 minutes and flush that hair right out of your life.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Tough hair clogs

"It cleared the clog within minutes!" - Mrs. Sharon K.


Usage Directions

  1. POUR. Slowly pour the entire bottle down the drain.
  2. WAIT. Allow the product to work for at least 15 minutes.
  3. RINSE. Flush with hot water.

Not intended for use in the toilet or garbage disposal.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

FAQs

Can I use Liquid-Plumr® Hair Clog Eliminator® as a depilatory (body hair remover)?

No. This product is not formulated to be safely used on skin. Follow first aid instructions on the label if this clog remover comes into contact with your body.

How do I know I have a “hair clog”?

Hair is a major component in most bathroom clogs. If anyone in your household has long hair, you likely have a greater amount of hair in your drains.

Can I use Liquid-Plumr® Hair Clog Eliminator® in a washing machine or drain basin?

This clog remover is not recommended for either washing machines or “laundry basins.” It was formulated specifically for fixtures with a plumbing “trap”, standard on most sinks. Additionally, the ingredients could compromise the outlet hose on your washing machine.

Can I use bleach in a drain I poured Liquid-Plumr® Hair Clog Eliminator® into?

Yes, but this won’t be necessary. If the clog persists, we recommend using an additional dose of Liquid-Plumr® Hair Clog Eliminator®.

Can I use a plunger with Liquid-Plumr® Hair Clog Eliminator®?

We do not recommend using a plunger when this clog remover is in the drain. Plunging may cause the clog remover to splash onto you or your clothing.

Is it okay to use Liquid-Plumr® Hair Clog Eliminator® on my bathtub or shower drain?

Yes, you can use as recommended either in bathtub or shower drains.

How do I use Liquid-Plumr® Hair Clog Eliminator®?

Slowly pour the entire contents of bottle over the drain opening; For slow drains, wait 15 minutes. For clogged drains, wait for the drain to clear. Then flush with hot tap water.

Can I use Liquid-Plumr® Hair Clog Eliminator® in my garbage disposal?

No, do not use this clog remover in your garbage disposal.

Can I use Liquid-Plumr® Hair Clog Eliminator® if I have standing water in my sink?

Yes, but for best results, we recommend using either Liquid Plumr® Full Clog Destroyer or Liquid Plumr ® Urgent Clear® for clogs with standing water.

Will Liquid-Plumr® Hair Clog Eliminator® improve a slow drain?

Yes. It’s formulated to work specifically on slow drains caused by hair clogs that form at or below the stopper, or clogs that are caused by build-up.

Can I use Liquid-Plumr® Hair Clog Eliminator® in my toilet?

We do not recommend using this clog remover in toilets. It is not formulated to remove the waste that may be clogging your commode.

Is Liquid-Plumr® Hair Clog Eliminator® safe for plastic pipes?

Yes. Laboratory tests confirm that this clog remover is safe for all household plumbing, including plastic pipes.

Is it safe to use Liquid-Plumr® Hair Clog Eliminator® if I have a septic system?

Yes, this clog remover is safe to use if you have a septic system. The ingredients will break down before they reach the septic system, and won’t kill the natural bacteria that exist there.

How long should I wait to flush the drain after using Liquid-Plumr® Hair Clog Eliminator®?

Wait 15 minutes before flushing the drain with water. This product is safe for pipes, and if you have an especially slow drain you can safely let it sit overnight. For fully clogged drains, wait for the drain to clear completely.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

General Information

Say goodbye to slow running drains with Liquid-Plumr® Slow Flow Fighter®. Two powerful liquids activate on contact to unclog drains with a thick, dense foam that fills the entire pipe and dissolves hair, gunk, grease and soap scum. It clears partial clogs, helps to maintain garbage disposals, and cleans pipe walls to get drains flowing again.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Slow-running drains
  • Dirty pipe walls

"We are stunned and amazed that it worked so quickly." - Mrs. Laura S.

Usage Directions

  1. POUR. Slowly pour the entire bottle down the drain. A deep-cleaning foam will fill the pipe.
  2. WAIT. For slow flowing drains, allow the product to work for one hour.
  3. RINSE. Flush with hot tap water.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur.Clean up any spillage immediately.

FAQs

What should be done if my problem gets worse after using this product?

This may happen when a partially dissolved clog gets lodged further down the pipe. We recommend trying another bottle of this product if you are still dealing with a slow flowing drain. If you have standing water in your sink, we recommend Liquid-Plumr® Urgent Clear®. However, if the problem continues to persist, you should call a plumber as there are some plumbing situations that even Liquid-Plumr can not fix.

How long should I wait before flushing the drain with water?

Wait at least one hour after pouring this product down the drain before flushing with water. If you have an especially slow drain, you can safely let the product sit overnight.

Is it normal to see foam in my sink or around the drain?

Yes. When using this product, foam may form in the sink as the two liquids combine. This shows that the pipe is full of the active foam. Follow normal usage directions by waiting one hour and rinsing with hot tap water. It is also normal not to see foam. It depends on your clog and your particular sink.

Are there different liquids in each of the chambers?

Yes, each chamber contains a powerful liquid. One chamber contains a thickened formula that dissolves hair and gunk. The other contains a foaming agent that carries the formula throughout the entire pipe. The two liquids combine to create a deep cleaning foam that clears your slow drain and cleans your pipe walls.

Is there a certain way to put the product into my drain?

No, just remove the cap and pour the entire bottle into the drain. The liquids in the different chambers will combine in your drain.

How much of this product should I use per occasion?

For best results, we recommend using the entire bottle for every clog problem.

Will this product improve a slow drain?

Yes, this product is formulated to work effectively on slow drains. Slow drains are sometimes caused by partial clogs that form at or below the stopper. In this situation, this product will remove the clog and fix the slow drain. Stubborn conditions may require a second treatment.

Can I use this product in a drain that contains standing water?

Yes. This product is designed to pour through standing water. However, it is formulated to work effectively on slow flowing drains. Therefore, for particularly stubborn clogs that cause standing water in drains, we recommend using Liquid-Plumr® Urgent Clear™.

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

What ingredients are in this product?

Ingredients include sodium hypochlorite, sodium hydroxide, biodegradable surfactant, and sodium silicate (corrosion inhibitor). Contains no phosphorus.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

General Information

Liquid-Plumr Full Clog Destroyer uses a specially formulated gel to unclog stubborn drains. Our thick, powerful gel won’t dilute as it cuts through standing water to attack built-up hair, gunk, grease and soap scum.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Standing-water clogs

"It busted through a very tough clog!" - Mr. Matt L.


Usage Directions

Usage Directions for 32-Ounce Bottle

  1. POUR. Slowly pour 1/2 of the bottle (2 cups) down the drain. For the toughest clogs, use the entire bottle.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.

Usage Directions for 80-Ounce Bottle

  1. POUR. Slowly pour 1/5 of the bottle (2 cups) down the drain. For the toughest clogs, use 1/2 of the bottle.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.

For garbage disposals, follow the same usage directions and flush with the disposal running. Avoid all splashing.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

FAQs

What should be done if my problem gets worse after using this product?

This may happen when a partially dissolved clog gets lodged further down the pipe. We recommend trying another dose of this product. However, if the problem continues to persist, you should call a plumber as there are some plumbing situations that even Liquid-Plumr can not fix.

How long should I wait before flushing the drain with water?

Wait at least 15 minutes after pouring this product down the drain before flushing with water. If you have an especially difficult clog, you can safely let the product sit overnight.

How much of this product should I use per occasion?

For best results, we recommend using 1/2 of our 32-ounce bottle or 1/5 of our 80-ounce bottle for every clog problem.

Will this product improve a slow drain?

Yes. Although this product is formulated to work very effectively through standing water, it may be used on clogs that have resulted in a slow-running drain.

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

Can I use this product in a drain that contains standing water?

Yes. This product is designed to pour through standing water. It is formulated to clear the full clogs that cause water to stop draining.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

Can I use this Liquid-Plumr® product in my garbage disposal?

Yes. This product is safe to use in your garbage disposal. When using this product in a drain that contains a garbage disposal, simply follow normal directions for use and flush the product with the disposal running.

What ingredients are in this product?

Ingredients include sodium hypochlorite, sodium hydroxide, biodegradable surfactant, and sodium silicate (corrosion inhibitor). Contains no phosphorus.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

MAINTENANCE PRODUCTS

As the original liquid clog remover, Liquid-Plumr Maintenance™ has been maintaining drains and neutralizing odors for over 35 years. Unclog your drains and keep them flowing with regular use.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

General Information

As the original liquid clog remover, Liquid-Plumr Maintenance™ has been maintaining drains and neutralizing odors for over 35 years. Unclog your drains and keep them flowing with regular use.

This drain cleaner is safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses

  • Maintain drains
  • Remove odors

"Opens up the drains as promised." - Mr. Kenneth P.

Usage Directions

Usage Directions for 32-Ounce Bottle
  1. POUR. Slowly pour 1/2 of the bottle (2 cups) down the drain.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.
Usage Directions for 80-Ounce Bottle
  1. POUR. Slowly pour 1/5 of the bottle (2 cups) down the drain.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.
For garbage disposals, follow the same usage directions and flush with the disposal running. Avoid all splashing.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

FAQs

What should be done if my problem gets worse after using this product?

We recommend trying Liquid-Plumr® Urgent Clear™ for particularly stubborn clogs.

How long should I wait before flushing the drain with water?

Wait at least 15 minutes after pouring this product down the drain before flushing with water. If you have an especially slow drain, you can safely let the product sit overnight.

Will this product improve a slow drain?

Yes, this product is formulated to work effectively on slow drains. For particularly stubborn clogs, we recommend using Liquid-Plumr® Urgent Clear™.

How much of this product should I use per occasion?

For best results, we recommend using 1/2 of our 32-ounce bottle or 1/5 of our 80-ounce bottle for every clog problem.

Can I use this product in a drain that contains standing water?

Yes. This product is designed to pour through standing water. However, it is formulated to work effectively on slow flowing drains. Therefore, for particularly stubborn clogs that cause standing water in drains, we recommend using Liquid-Plumr® Urgent Clear™.

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

Can I use this Liquid-Plumr® product in my garbage disposal?

Yes. This product is safe to use in your garbage disposal. When using this product in a drain that contains a garbage disposal, simply follow normal directions for use and flush the product with the disposal running.

What ingredients are in this product?

Ingredients include sodium hypochlorite, sodium hydroxide, biodegradable surfactant, and sodium silicate (corrosion inhibitor). Contains no phosphorus.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

What should I do if I come in contact with either the foam or the liquids in Liquid-Plumr® products?

If in eyes, flush immediately with water for 15 minutes. If wearing contact lenses, remove first. If on skin, wash immediately with water. If swallowed, drink a full glass of water. Do not induce vomiting. In all cases, call a doctor or poison control center immediately.

Product Selector

Now you can harness the power of Liquid-Plumr to clean and deodorize your garbage disposal. Liquid-Plumr Disposal + Drain Foaming Cleaner gets down deep to clean hard-to-reach areas and eliminate lingering smells in your garbage disposal. It leaves nothing behind but a fresh, citrus scent. Simply drop one no-mess, no-fuss, water-soluble pack into your disposal and it does the dirty work in your kitchen so you don’t have to!

Safe for all septic systems.

General Information

Now you can harness the power of Liquid-Plumr to clean and deodorize your garbage disposal. Liquid-Plumr Disposal + Drain Foaming Cleaner gets down deep to clean hard-to-reach areas and eliminate lingering smells in your garbage disposal. It leaves nothing behind but a fresh, citrus scent. Simply drop one no-mess, no-fuss, water-soluble pack into your disposal and it does the dirty work in your kitchen so you don’t have to!

Safe for all septic systems.

Recommended Uses

  • Clean and deodorize your garbage disposal
  • Freshen your disposal with a robust citrus scent
  • Use weekly for best cleaning and deodorizing results

"My family and I just love your products!" - Lillian G.


Usage Directions

  1. START with an empty sink and your disposal off. Run a full stream of hot water for 1 minute. Reduce water flow to a thin stream into side of sink.
  2. INSERT one Foaming Power Pack completely into disposal. (DO NOT OPEN INDIVIDUAL PACKS.)
  3. CLEAN. Turn on disposal to start cleaning. Foam may rise into the sink. Turn off disposal when foam completely retreats into disposal. Rinse remaining foam from sides of sink. To maintain freshness, reseal the bag after each use.

Precautions

Will not clear a clogged drain. To clear a clogged drain, use Pro-Strength Liquid-Plumr® Urgent Clear®™ Gel. Keep out of reach of children. Harmful if swallowed. Eye and skin irritant. Do not use with other drain cleaners, including other Liquid-Plumr® products, as the release of hazardous gases may occur.

FAQs

What ingredients are in this product?

Ingredients include sodium bicarbonate, citric acid, and sodium lauryl sulfate and fragrance.

What should be done if my problem gets worse after using this product?

You may use two Foaming Power Packs at a time in your disposal, or decrease the amount of time between cleanings.

How long should I wait before flushing the drain with water?

After putting a Foaming Power Pack into your disposal, turn the disposal on. Wait 1-2 minutes for any foam to retreat into into the disposal, and then rinse the sink with water.

Is it normal to see foam in my sink or around the drain?

Yes. When using this product, foam may rise up into your sink, or into both sinks if you have a double sink. It is also normal not to see foam. Even if no foam appears, the product is still cleaning and deodorizing deep in your drain and disposal.

How much of this product should I use per occasion?

For best results, we recommend using the one foaming power pack each time you want to clean and deodorize your disposal.

Will this product improve a slow drain?

No. This product is not designed to clear a clog. For clog removal, use Liquid-Plumr:® Urgent Clear®

Can I use this product in a drain that contains standing water?

No. This product is not designed to clear a clog. For clog removal, use Liquid Plumr Urgent Clear®

Can I use this Liquid-Plumr® product in my garbage disposal?

Yes. This product is specifically designed for use in your garbage disposal. It is designed to clean the disposal and drain with the assistance of the agitation from the disposal, similar to how a washing machine works. Although it will not damage a sink without a disposal, it will not clean a sink without a disposal effectively.

Is this product’s packaging recyclable?

Yes. After pouring the entire bottle into your drain, rinse the bottle and then recycle.

Can I use this product to keep my drain from clogging?

Yes. This product is very effective on full clogs and slow flow drains, and can be used regularly to keep your pipes flowing freely.

How often can I use this product?

Use this product whenever water stops flowing into your drain, which is characterized by standing water. You may also use it whenever you notice a slow running drain.

Is it safe to mix Liquid-Plumr® products with any other product?

No. Do not use Liquid-Plumr® products with ammonia, toilet bowl cleaners or other non–Liquid-Plumr® clog removers, as splashing or the release of hazardous gases may occur. We do not recommend using Liquid-Plumr® products with non–Liquid-Plumr® products. It is safe to use any Liquid-Plumr® product in the same drain.

Product Selector