Whether you’re attacking stubborn clogs or maintaining squeaky-clean pipes, there’s a Liquid-Plumr® that’s right for you.

Put the power of a professional plumber in your hands with Liquid-Plumr® Double Impact® Snake + Gel System. The 23" snake dislodges hair and gunk that causes blockage, and a thick gel flushes away the residual gunk that slows drains down.

Safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses
Toughest clogs
Standing water clogs
Slow-running drains

Usage Directions

  1. INSERT THE SNAKE. Insert the 23-inch snake into the drain and move it up and down to grab the clog. Pull the snake out of the drain slowly and throw it away.
  2. POUR. Slowly pour the entire bottle down the drain.
  3. WAIT. Allow the product to work for at least 15 minutes.
  4. RINSE. Flush with hot water.

Not intended for use in the toilet or garbage disposal.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.Snake must be used before pouring gel down the drain. Snake shouldn’t be used when gel is present in pipes.

Now you can harness the power of Liquid-Plumr to clean and deodorize your garbage disposal. New Liquid-Plumr Disposal + Drain Foaming Cleaner gets down deep to clean hard-to-reach areas and eliminate lingering smells in your garbage disposal. It leaves nothing behind but a fresh, citrus scent. Simply drop one no-mess, no-fuss, water-soluble pack into your disposal and it does the dirty work in your kitchen so you don’t have to!

Safe for all septic systems.

Recommended Uses
Clean and deodorize your garbage disposal
Freshen your disposal with a robust citrus scent
Use weekly for best cleaning and deodorizing results

Usage Directions

  1. START with an empty sink and your disposal off. Run a full stream of hot water for 1 minute. Reduce water flow to a thin stream into side of sink.
  2. INSERT one Foaming Power Pack completely into disposal. (DO NOT OPEN INDIVIDUAL PACKS.)
  3. CLEAN. Turn on disposal to start cleaning. Foam may rise into the sink. Turn off disposal when foam completely retreats into disposal. Rinse remaining foam from sides of sink. To maintain freshness, reseal the bag after each use.

Precautions

Will not clear a clogged drain. To clear a clogged drain, use Pro-Strength Liquid-Plumr® Urgent Clear™ Gel. Keep out of reach of children. Harmful if swallowed. Eye and skin irritant. Do not use with other drain cleaners, including other Liquid-Plumr products, as the release of hazardous gases may occur.

If your bathroom sink has a stubborn clog

Live life in the fast lane with Liquid-Plumr Urgent Clear. This cutting-edge gel formula is lab-tested to blast away even the toughest clogs in 7 minutes!* Works best on hair, gunk, grease and soap scum.

Safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses
Fast clog-clearing action
Standing water clogs
Slow-running drains

Usage Directions

  1. POUR. Slowly pour the entire bottle down the drain.
  2. WAIT. For fully clogged drains, allow the product to work for at least 7 minutes or until the drain is clear. For slow drains, allow the product to work for at least 15 minutes.
  3. RINSE. Flush with hot water.

For garbage disposals, follow same usage directions and flush with disposal running. Avoid all splashing.

Not intended for use in the toilet.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

*Based on full hair clogs in lab tests.

Best New Product 2012

Say goodbye to slow running drains with Liquid-Plumr Slow Flow Fighter. Two powerful liquids activate on contact to create a thick, dense foam that fills the entire pipe and dissolves hair, gunk, grease and soap scum. Clears partial clogs and cleans pipe walls to get your drain flowing again.

Safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses
Slow-running drains
Dirty pipe walls

Usage Directions

  1. POUR. Slowly pour the entire bottle down the drain. A deep-cleaning foam will fill the pipe.
  2. 2. WAIT. For slow flowing drains, allow the product to work for one hour.
  3. 3. RINSE. Flush with hot tap water.

For garbage disposals, follow same usage directions and flush with disposal running. Avoid all splashing.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur.Clean up any spillage immediately.

Liquid-Plumr Full Clog Destroyer uses a specially formulated gel to eliminate the toughest clogs. Our thick, powerful gel won’t dilute as it cuts through standing water to attack built-up hair, gunk, grease and soap scum.

Safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Use
Standing-water clogs

Usage Directions

Usage Directions for 32-Ounce Bottle
  1. POUR. Slowly pour 1/2 of the bottle (2 cups) down the drain. For the toughest clogs, use the entire bottle.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.
Usage Directions for 80-Ounce Bottle
  1. POUR. Slowly pour 1/5 of the bottle (2 cups) down the drain. For the toughest clogs, use 1/2 of the bottle.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.

For garbage disposals, follow the same usage directions and flush with the disposal running. Avoid all splashing.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

As the original liquid clog remover, Liquid-Plumr Maintenance has been maintaining drains and neutralizing odors for over 35 years. Keep drains flowing with regular use.

Safe for all septic systems and pipes, including PVC, plastic, copper, and old pipes.

Recommended Uses
Maintain drains
Remove odors

Usage Directions

Usage Directions for 32-Ounce Bottle
  1. POUR. Slowly pour 1/2 of the bottle (2 cups) down the drain.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.
Usage Directions for 80-Ounce Bottle
  1. POUR. Slowly pour 1/5 of the bottle (2 cups) down the drain.
  2. WAIT. Allow it to work for 15 minutes. In cases of standing water, wait until drain is clear.
  3. RINSE. Flush with hot tap water.

For garbage disposals, follow the same usage directions and flush with the disposal running. Avoid all splashing.

Precautions

Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.

Pick Your Plumr

Not sure which product is
right for you? Tell us your
problem, and we’ll help
fix your flow!


Find Your Solution

Money-Back Guarantee

Try Liquid-Plumr®
risk free with our money-back guarantee.

Download the form